RSS export of vacancies - Only featured vacancies : No / Contract type : Permanent contract

2026-42394 - Electrical/HVAC Engineer H/F

Thu, 09 Apr 2026 08:44:05 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION : Responsible for all ELECTRICAL & HVAC preparation subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the site team Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability. • Take charge of Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparation standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Experience in ELECTRICAL Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), E-vision permit Systems and other Preparations, Tools/Resources.
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42339 - MONTEUR MECANICIEN H/F H/F

Wed, 08 Apr 2026 22:21:42 Z

Contract type : Permanent contract
Position description :
Vous aimez la technique? vous souhaitez un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Assurer, sur chantier et/ou en atelier, les opérations de démontage, remise en état et remontage de machines tournantes, turbines ou auxiliaires selon une gamme opératoire ou un Plan Qualité Affaire. - Prendre en charge le matériel : Réaliser l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées Identifier des pièces et sous-ensembles et réaliser le stockage approprié - Démonter et expertiser : Réaliser le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles Réaliser le nettoyage approprié des pièces et des sous-ensembles Réaliser le contrôle dimensionnel et géométrique Réaliser le contrôle des jeux fonctionnels Identifier les pièces à réparer ou à remplacer En atelier, renseigner le compte rendu d’évaluation (proposer à son responsable les réparations à effectuer) - Remettre en état et remonter le matériel : Réaliser le contrôle dimensionnel et géométrique des pièves neuves ou réparées Réaliser le contrôle des jeux fonctionnels en cours de remontage Réaliser des opérations d’ajustage Réaliser des opérations de montage Réaliser des opérations simples de tuyauterie et chaudronnerie Réaliser les travaux par point chaud (soudure, montage par dilatation thermique…) Réaliser des opérations de réglage - Opérations de réglage (sur chantier) : Assister :l’ingénieur en charge du démarrage le client dans ses opérations de conduite de démarrage Surveiller : Les éléments critiques et ceux qu’il a visités Les paramètres de fonctionnement et avertir le responsable du démarrage en cas d’anomalie L’absence de fuites d’huile, de combustible, d’air ou de vapeur - Traçabilité des opérations: Renseigner les feuilles de contrôle Renseigner les feuilles d’inventaires à réception et expédition Participer à la rédaction des divers rapports et procès-verbaux Renseigner le Plan Qualité Affaire et gamme - Moyens matériels et poste de travail: Ranger et nettoyer les outillages fournis Veiller à l’entretien du matériel Maintenir le poste de travail propre et rangé Informer le chef d'équipe/chef de chantier/Responsable atelier de tout outillage manquant ou défectueux Effectuer une demande de moyens supplémentaires si requis auprès du chef de chantier / chef d’équipe / Responsable atelier Effectuer le rangement final du chantier / zone de travail atelier et des outillages - Être en appui technique (compagnonnage...) des monteurs mécaniciens, des alternants…. - Peut-être amené à encadrer ponctuellement une équipe de monteurs mécaniciens

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative En chantier et en l’absence de chef de chantier, savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier. Ce poste nécessitera un accompagnement en interne. (formation / compagnonnage / Ecole turbine) Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : B-Limited working proficiency

2026-42393 - CRANE PREPARATION TECHNICIAN H/F

Sun, 05 Apr 2026 22:19:45 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION : Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team. Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources. Skills required: Computer Literacy, Preparations tools proficiency, Ability to work in a multicultural organization, good presentation and communication skills
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42795 - PVV Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:52:21 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify safe execution of pressure testing, nitrogen leak testing, and line blowing activities. • Review risk assessments and JSAs prior to critical activities (hydrotest, pneumatic test, chemical cleaning, nitrogen displacement). • Ensure strict control of temporary test equipment and test packs. • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor PVV Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated gauges, and test equipment. • Assist Contractor in resolving technical interface issues when required. 2.3 Technical Oversight – PVV Scope Witness, review and validate Contractor execution of: • Line checking against P&ID and Isometrics • Hydrostatic testing of piping systems • Pneumatic testing where applicable • Flushing, blowing and cleaning activities (water flushing, air blowing, steam blowing as applicable) • Drying and preservation activities • Valve inspection • Verification of correct installation of spectacle blinds and spades • Final reinstatement after testing Ensure no pressure test or system release occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test packs o Hydrotest dossiers o Method statements o Inspection & Test Records (ITRs) o Pressure charts and calibration certificates • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in P&IDs and Isometrics. • Review final PVV Pre-Commissioning dossier before handover.

• Degree or Diploma in Mechanical Engineering or related discipline • Minimum 5 years Oil & Gas experience • Minimum 3 years in Piping / Mechanical Pre-Commissioning roles • Previous experience in SIMOPS environments • Strong knowledge of pressure testing standards (ASME, project specifications) • Familiarity with TotalEnergies General Specifications preferred
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42794 - Instrumentation Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:49:31 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify strict control of live systems and interface with energized electrical panels. • Review risk assessments and JSAs prior to critical activities • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor Instrumentation Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated instruments, and testing equipment. • Ensure calibration benches and tools comply with project requirements. • Assist Contractor in resolving technical or interface issues when required. • Ensure proper sequence between: o Pre-Commissioning o Commissioning • Ensure subsystem boundaries are respected in line with OPERCOM philosophy. 2.3 Technical Oversight – Instrumentation Scope Witness, review and validate Contractor execution of: • Instrument calibration (pressure, temperature, level, flow transmitters) • PSV / safety instrument checks (as applicable within scope) • Loop checking (field to DCS/ESD/PLC) • Marshalling cabinet inspections • JB (Junction Box) inspection and continuity verification • Impulse air tubing and leak testing • DCS / ESD I/O verification (interface with ICSS team) • Cause & E􀆯ect (C&E) test preparation support Ensure no loop closure or live signal testing occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test procedures o Method statements o Calibration certificates o Inspection & Test Records (ITRs) o Loop folders o Pre-Commissioning dossiers • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in loop diagrams and hook-ups. • Review final Instrumentation Pre-Commissioning dossier before handover. • Raise observations and request corrective actions when required.

• Degree or Diploma in Instrumentation / Electrical & Instrumentation Engineering • Minimum 5 years Oil & Gas experience • Minimum 3 years in Instrumentation Pre-Commissioning / Commissioning roles • Previous experience in SIMOPS environments • Familiarity with TotalEnergies General Specifications preferred
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42793 - Electrical Precom Supervisor M/F

Thu, 02 Apr 2026 12:45:52 Z

Contract type : Permanent contract
Position description :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight  Ensure Contractor compliance with TotalEnergies HSE standards.  Review risk assessments and JSAs prior to critical activities.  Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance  Supervise Contractor Electrical Pre-Commissioning activities.  Verify adequacy of manpower, tools, calibrated instruments, and test equipment.  Assist Contractor in resolving technical issues when required.  Ensure proper sequence between: o Mechanical Completion o Pre-Commissioning o Commissioning. 2.3 Technical Oversight – Electrical Scope Witness, review and validate Contractor execution of:  IR & continuity testing  HV / MV / LV cable testing  Transformer pre-energization checks  Switchgear inspection  Protection relay testing  Earthing & lightning protection verification  Motor solo runs  UPS & battery testing  Energization procedures  Interface loop checks (with Instrument team) Ensure no energization occurs without Company validation. 2.4 Documentation & Quality Control  Review and approve: o Test procedures o Method statements o Inspection & Test Records (ITRs) o Energization dossiers  Monitor punch list closure.  Ensure redline markups are properly reflected.  Review final Pre-Commissioning dossier before handover.  Raise observations and request corrective actions when required.

3. Required Qualifications  Degree in Electrical  Minimum 5 years Oil & Gas experience.  Minimum 3 years in Pre-Commissioning / Commissioning Electrical roles.  Previous experience in SIMOPS environments.  Familiarity with TotalEnergies General Specifications preferred.
Location : Ratawi Oil Field, North Rumaila
Language / Level :
Arabic : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42712 - HEAD OF MECHANICAL MAINTENANCE PREPARATOR - ONSHORE M/F

Mon, 30 Mar 2026 12:10:50 Z

Contract type : Permanent contract
Position description :
Purpose He checks and ensures that vital equipment on production sites is available as and when required. Qualifications required; The holder of this position must have the following qualifications: ✓ Equivalent of DUT/BTS (French), B.Sc. Mechanical/Instrumentation/Electrical Engineering (2.1), ✓ 5 years of general industrial maintenance ✓ Computer literacy is required, ✓ Ability to work offshore under the climatic conditions of the site, ✓ Ability to work in a multinational team. Ability to work in a service relationship. ✓ Competence/experience in the relevant specialities (mechanical/fitting, handling, tooling, electricity, instruments), ✓ Experience in CMMS ✓ Working language: English Bright 3.5 (or equivalent)

HSE ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity GENERAL DESCRIPTION ✓ Support of offshore operations, ✓ Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) ✓ Check repairs requirement and quality ✓ Short- and medium-term improvement methods MAIN FUNCTIONS ✓ Review preventive maintenance program validity. Check availability of means to complete it as and when required. ✓ Assist the SITE as required for corrective maintenance ✓ Prepare work pack for specific maintenance job when requested ✓ Analyse CMMS report for his field of competence and recommend improvement solutions to COMPANY as required ✓ Set up and implement technical procedures, follow-up and update maintenance procedure in relation with COMPANY representatives, ✓ Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS, ✓ Taken vibration measurements on site and analysis for Method Mechanical engineer
Location : GIRASSOL FPSO
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : B-Limited working proficiency

2026-42696 - IT Officer (with AI & Digital Innovation Support) M/F

Mon, 30 Mar 2026 09:04:43 Z

Contract type : Permanent contract
Position description :
To be the link with the Headquarters for the IT management within the BU MEA an Implement and support to the IT transition policy / plan. He/She is accountable for maintaining proper access rights to sensitive data and ensuring protection of personal data such as medical records. The role also includes coordinating AI and digital initiatives, acting as a local focal point to support the identification, deployment, and adoption of AI-enabled tools in line with company strategy, security, and governance standards. Responsibilities: Maintains the computer systems, servers and networks of the BU. He / she may install and configure computer systems, diagnose hardware and software faults and solve technical and applications problems. Installing and configuring new computer and server, Installing and testing new software and corporate software. Maintaining computers, servers and network hardware. Maintaining in house software (GEMS / EDMS / Prolog / SAGE), insuring they are working properly. Ensuring the coherence of the data informed in the in-house software, taking care of their recurrent updates. Extracting data of in-house software upon the request of other support functions, business centers or Headquarters. Administering file server user permissions and data access policies Managing firewall, email and spam filtering systems. Ensuring anti-virus software is installed, properly configured, regularly updated and working properly on all PC and server stations. Monitoring LAN for security issues. Creating and setting account users in Active Directory, managing Active Directory and Group Policies. Setting up and maintaining backup system, and onsite/offsite storage Planning for disaster recovery. Installing software available to appropriate users. Monitoring against usage of unlicensed and unauthorized software. Diagnosing and troubleshooting hardware & software failures (application plus system data base). Implement IT solutions, policies and procedures to maximize efficiency and availability of existing infrastructure, ensure integrity of all company electronic data, and support effectively the company goals and strategies. Liaise with external support agencies to resolve faults specify. Identifying suitable IT vendors and support contractors. Liaising with external support agencies to resolve faults. Maintaining computer peripheral equipment e.g. printers, scanners. Maintaining IT inventory and software licensing compliance checklist. Managing Relationship with system subcontractor. Correspondent with the headquarters IT team and the subsidiaries. Support the coordination of AI-related initiatives (e.g., AI assistants, automation tools, data analytics solutions) in alignment with corporate guidelines. Act as a bridge between users and AI service providers, gathering use cases, feedback, and improvement ideas. Assist in identifying opportunities for process automation and efficiency gains using AI or digital tools.

Strong knowledge of all software, hardware, database, servers etc. used in the company’s network. Ability to troubleshoot and swiftly resolve issues. Basic understanding of AI concepts such as Generative AI (e.g., AI assistants, chatbots), Process automation, Data-driven decision support Ability to understand AI use cases and translate business needs into structured requests. Curiosity and willingness to learn emerging digital and AI technologies. Good oral, written, and interpersonal communication skills to deal with multi-cultural environment. Fluency in English.
Location : Global tower, Abu Dhabi
Language / Level :
English : D-Full professional proficiency

2026-42259 - Field Technician - HV/FO M/F

Sat, 28 Mar 2026 23:36:04 Z

Contract type : Permanent contract
Position description :
Follow instructions of the team leader / supervisor on the WTG/OSP at all times Ensure materials and kit are safely stored and free from damage Install, control, and maintain asset protection and housekeeping Assist with lifting and lowering of asset equipment Ensure wastage is segregated and disposed as per the waste management procedures Follow project procedures, report any deviation to team leader before proceeding Follow all instructions given to them by their team leader, Supervisor, or Manager Work safely at-all-times Take an active part in HSEQ throughout the project duration, reporting any safety observations both positive and /or negative Encourage their fellow team members to be proactive, take care of each other Attend daily briefings with Supervisor for HSEQ, progress, logistics, welfare Advise of any potential risk and/or delay and mitigate where possible Communicate with the team leader or supervisor any unforeseen issues or concerns. Defect reporting Activate the all-stop command if deemed necessary to protect people, property, and the environment Maintain contractor to client relations

Within SPIE Wind Connect the HV\FO assistants play an important role in the continuous improvement process which is aimed at developing emerging talent within the business. HV\FO assistants are mentored by senior personnel on live projects, which provides them with experience, knowledge, and real-time training.
Location : Section 3, Minsheng E Rd, Songshan District, Taipei City, Taiwan
Language / Level :
English : C-Professional working proficiency

2026-42653 - INSTRUMENTATION SUPERVISOR M/F

Wed, 25 Mar 2026 10:28:38 Z

Contract type : Permanent contract
Position description :
HSE ✓ Ensures HSE policy fulfillment during his activities ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Is responsible to ensures compliance with HSE (occupational and process) Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance and responsible environment attitude ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity ✓ Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (if required); ✓ Performs the updating of technical documentation; ✓ Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions; ✓ Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Invest Operations ✓ Organises on site the maintenance operations which are placed under his responsibility, ✓ Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of utilities and equipment placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out, at the CSR request, any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 5 to 10 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ Specific professional knowledge: SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent) He must have a proven sense of responsibility
Location : DALIA FPSO
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : B-Limited working proficiency

2026-42575 - Acheteur indirect / Indirect Buyer H/F

Thu, 19 Mar 2026 09:27:06 Z

Contract type : Permanent contract
Position description :
1. Assurer le Category Management pour les catégorie indirectes (EPI, Outillages, Assurances, Flotte…) Réaliser et analyser une cartographie des dépenses pour les catégories indirectes Comprendre les besoins et attentes de ses clients internes (Country Manager, le BU manager ou acheteurs filiales) Etablir une stratégie Achats par catégorie en fonction des priorités annuelles Lancer des Appels d’offres Négocier avec les fournisseurs sur les aspects Coûts-Qualité-Délais et en prenant en compte l’aspect RSE Mettre à jour les accords commerciaux existants et signer de nouveaux accords commerciaux S’assurer de la bonne exécution des contrats et du respect des engagements contractuels Développer des catalogues Achat (si pertinence) Mesurer les gains financiers réalisés pour chaque catégorie Spécificité Assurances : en collaboration avec le Département Assurance du Groupe SPIE, revoir les polices de couverture actuelle et réajuster les couvertures en fonction de nos besoins réels (réduire les coûts liés à la sur-couverture) 2. Assurer la Gestion des contrats cadres indirects pour l’ensemble du périmètre GSE Récupérer l’ensemble des contrats cadres indirects en vigueur dans toutes les filiales GSE Alimenter notre base de données regroupant l’ensemble des contrats Ajouter ces contrats dans la contrathèque MySourcing (iContract) Configurer les alertes liées aux dates de fin contrats (iContract) Être en support des filiales dans la réalisation et la négociation de contrats cadres indirects 3. Participer à la décarbonisation et à la réduction des émissions de CO2 du Scope 3 de SPIE GSE pour les catégories indirectes Avec le support de la Direction des Achats, identifier les fournisseurs prioritaires chez SPIE GSE à intégrer dans un programme de réductions des émissions de CO2 (Ecovadis, SBTI, Viaco…) Mener une campagne d’évaluation annuelle de la performance RSE de nos fournisseurs indirects prioritaires Prospecter les fournisseurs indirects prioritaires et les persuader d’intégrer un programme d’évaluation auprès d’un organisme certifié 4. Participer aux campagnes de réduction du panel pour les fournisseurs des catégories indirects Pour les catégories indirectes, établir un plan de réduction du panel fournisseur en collaboration avec les fonctions opérationnelles de SPIE GSE Identifier les bonnes pratiques du Groupe applicables à SPIE GSE et les déployer sur les catégories indirectes Assurer le rôle de « gatekeeper » pour réguler la création de fournisseurs pour les catégories indirects 5. Participer aux campagnes d’évaluation des fournisseurs indirects Participer aux campagnes d’évaluation annuelle pour les fournisseurs indirects identifiés (avec la collaboration des acheteurs BU) Pour les fournisseurs ayant des actions correctrices ou des plans de progrès, suivre leur avancement tout au long de l’année Mettre en place un programme de suivi des performances pour le « TOP 10 fournisseurs indirects » (hors Travel)

Savoirs : Processus Achats Anglais professionnel Techniques de négociation Notions RSE Savoir-faire : Faire une expression de besoins Réaliser et analyser une cartographie des dépenses Négocier les marchés aux meilleures conditions Rédiger des contrats commerciaux – en français et en anglais Faire du sourcing Lancer et suivre un appel d’offres Evaluer les risques fournisseurs à court, moyen et long terme Suivre les performances des fournisseurs (KPI) Organisation Savoir être : Sens de l’écoute et du dialogue Esprit analytique Curiosité d’esprit Rigueur Fiabilité Qualités relationnelles afin de pérenniser les relations internes et externes Ténacité et résistance au stress
Location : CERGY
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : D-Full professional proficiency

2026-41939 - Sales Manager M/F

Wed, 18 Mar 2026 23:18:36 Z

Contract type : Permanent contract
Position description :
Create and manage new business pipelines and develop relationships with key decision makers. Establish and support the creation of high-calibre value propositions with the Bids and Tendering team. Establish sales objectives by forecasting and developing annual sales targets and projecting expected profit for existing and new bids. Facilitate the alignment of BD & marketing strategies so as to enhance the overall proposition and profile of the business. Develop distinct client-targeted approaches to relationship development & management. Undertake individual client ‘need’ analysis to support development of tailored value propositions. Promote the SPIE Wind Connect Group brand whilst maintaining its highly regarded reputation at key networking events. Cultivate and maintain strong relationships with key clients, leaders and strategic partners. Act as a point of escalation for client issues, working closely with the key stakeholders to resolve conflicts and maintain positive relationships. Utilise data-driven insights to make informed choices and enhance sales strategies. Provide regular reports and updates to senior management on contract performance, market trends, and competitor activities. Assess and report on sales & marketing performance against key performance indicators (KPIs) and measure return on investment (ROI).

lead the Business Development function for the business, including management responsibility for the Marketing and Bids & Tender teams, to oversee new and existing sales, support our growth strategy, whilst developing, maintaining and enhancing relationships with clients and key stakeholders. The role shall be responsible for establishing and monitoring key sales and client-relationship metrics in order to promote value-driven growth and performance.
Location : Wandhills Ave, Skelton-in-Cleveland, Saltburn-by-the-Sea TS12 2LQ, UK
Language / Level :
English : E-Native or bilingual proficiency

2026-42557 - QAQC Inspector* M/F

Wed, 18 Mar 2026 14:48:37 Z

Contract type : Permanent contract
Position description :
Ø QAQC will follow the instruction given by Quality Supervisor/coordinator. Ø Interpreting engineering drawings & requirements; performs thorough dimensional inspection and completes Inspection Report provided by the machine shop. Ø Use dimensional measuring instruments like thread ring/plug gauges, ball gauges, micrometers, calipers, indicators, profile projectors, and Brinell hardness test equipment as well when request. Ø Follow up Inspection Procedure for OCTG premium connections. ( Tenaris , Vallourec ) Ø Inspector shall be competent to raise NCRs when nonconforming conditions are detected Ø QAQC Inspector must communicate any issue find during inspection of the Client tools to the direct Supervisor. Ø QAQC Inspector will receive in electronic version (e-mail) some confidential document of Client propriety that must NOT be share previous authorization. Ø Performing the Work in accordance with the parameters specified in the programme (WORK ORDER) shall be subject to acceptance by Company. The QAQC Inspector will cover the inspection and traceability documentation for assembly, function testing, and repair tools

• License degree or technical Diploma: Electronics, Mechanical or other • Computer literate (Microsoft word, excel, power point) Experience and technical knowledge: · At least minimum 3/5 years of experience in the same position. ü OCTG, BHA, Drilling Equipment ü Premium Connection on CSG & TBG (Tenaris Vallourec) ü Premium Connection on drilling equipment (Grand Prideco) ü ISO / API ü Calibration equipment. ü Handling and care of OCTG, Drilling equipment and BHA. ü Material identification and characteristic.
Location : Luanda, Machine Shop
Language / Level :
English : C-Professional working proficiency

2025-41245 - Project Coordinator M/F

Wed, 18 Mar 2026 11:58:58 Z

Contract type : Permanent contract
Position description :
Collaborate with the Project Manager and the PMO support functions to manage manpower mobilisation. Attend resource and project meetings and coordinate the rotation planning process. Ensure technicians' qualifications, certifications, and training are up-to-date and recorded; coordinate recertification needs with the Training Coordinator. Ensure timely and accurate verification and approval of hours, absence, and holiday data submitted by technicians the EGT portal. Maintain regular communication with technicians regarding assignments and project expectations. Coordinate allocation of PPE and workwear, ensuring accurate cost allocation to projects. Book travel and accommodation for assigned project teams. Plan and document workload details, including port operations and service documentation requirements. Assist the PM in planning site activities, tracking changes in project scope and status, and updating relevant records. Develop and update technician rotation plans and ensure alignment with key contractual deliverables. Communicate with clients on progress, deviations and deliverables as contractually defined in collaboration with the Project Manager. Update relevant stakeholders during project execution regarding changes to schedules, scope, or priorities.

A Project Coordinator's responsibilities include the coordination of personnel for each project, producing project documents, sourcing and maintaining resourcing plans and coordinating project administration. The Project Coordinator will be responsible for developing and preparing reports, consolidating human capital data, and managing multiple project resourcing scopes. The Project Coordinator role work closely with project managers to optimise resources and develop a training matrix tracker to ensure projects are fully resourced with a qualified and skilled workforce.
Location : SPIE Wind Connect HQ, Skelton, Cleveland TS12 2LQ
Language / Level :
English : E-Native or bilingual proficiency

2026-42506 - INGENIEUR HSE SITE H/F H/F

Mon, 16 Mar 2026 23:28:53 Z

Contract type : Permanent contract
Position description :
Vous souhaitez évoluer dans un environnement de travail stimulant? vous n'aimez pas la routine? alors ce poste est fait pour vous. Vos missions : Assurer la prévention et la maîtrise des risques HSE sur les sites clients et contribuer au déploiement des standards HSE de l'entreprise. Il intervient principalement en support des opérations SPIE TM et apporte également un support HSE ponctuel à d’autres projets du périmètre ENA ainsi qu’aux activités de préparation d’offres (bids). Le poste combine des activités opérationnelles terrain et de support technique HSE dans un objectif d’amélioration continue de la performance HSE. - Support aux équipes projet pour la préparation HSE des chantiers (travaux SPIE TM et sous-traitants) Participation aux analyses de risques et la définition des moyens de prévention associés Support à la réalisation des PDP Vérification de l’adéquation des compétences / habilitations / autorisations de conduite / moyens (vérification VGP…) Support au briefing du Chef de chantier sur les risques / mesures de prévention - Support aux Chefs de chantier sur site client Participation à l’inspection commune et à la validation du PDP Vérification de l’état des moyens et des VGP, vérification des consignations, purges préalables à l’intervention Vérification de l’adéquation des compétences / habilitations / autorisations de conduite Support au briefing des intervenants sur les risques / mesures de prévention Vérification de l’appropriation par les intervenants et de la bonne exécution des dispositions HSE prévues pour l’exécution des travaux en sécurité (PDP, respect des consignes SPIE TM, règles vitales SPIE) Veiller à la mise à jour des analyses de risques en cours de chantier Support pour les animations de causeries et le déploiement des pratiques de fiabilisation des interventions (pré-job briefing / minute sécurité / vigilance partagée / attitude interrogative…) - Traiter les remontées d’information du chantier (accidents, presqu’accidents, situations dangereuses, causeries,…) Remonter et analyser les causes des incidents QHSSSE Participer à la proposition des actions d’amélioration - Support HSE aux projets hors SPIE TM Réaliser des missions ponctuelles d’appui HSE sur des sites clients hors périmètre STM Apporter un support technique HSE aux équipes opérationnelles Participer à l’analyse des risques et à la définition des mesures de prévention Contribuer à la diffusion des standards HSE SPIE - Support aux activités de préparation d’offres (Bid Support) Contribuer aux volets HSE des dossiers d’appel d’offres Participer à l’identification des risques HSE associés aux projets Définir les stratégies HSE et plans de prévention associés Apporter une expertise HSE aux équipes commerciales et techniques

· BAC+5 – diplôme d’ingénieur en mécanique ou équivalent · Expérience minimum de 10 ans sur sites industriels · Bonne connaissance des activités de maintenance mécanique industrielle · Maîtrise des risques liés aux travaux mécaniques · Connaissance des opérations de levage et manutention · Maîtrise des risques liés aux travaux en hauteur · Connaissance des risques liés aux espaces confinés · Connaissance des procédures de consignation / déconsignation (LOTO) · Maîtrise des analyses de risques chantier (JSA, analyses préalables) · Connaissance des plans de prévention (PDP) et permis de travail · Connaissance des inspections communes préalables · Bonne connaissance de la réglementation HSE applicable aux sites industriels · Capacité à identifier et analyser les situations dangereuses · Sens de l’observation et vigilance terrain · Rigueur et capacité d’analyse · Capacité à travailler en autonomie · Bonnes compétences relationnelles avec équipes et clients · Capacité à sensibiliser les équipes aux règles HSE · Esprit critique et force de proposition · Contribution aux démarches d’amélioration continue HSE · Anglais professionnel niveau B2 minimum Le poste est basé dans nos locaux de Lons en France. Des déplacements sur chantier sont à prévoir en France et à l'étranger (+/- 50 % du temps) Répartition de 75% sur l'activité SPIE TM et 25% sur la BU ENA. Parce-que vos valeurs sont les nôtres : flexibilité, agilité et expertise rejoignez-nous.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : C-Professional working proficiency

2026-42055 - ELECTRICAL / HVAC SUPERVISOR M/F

Mon, 02 Mar 2026 14:41:34 Z

Contract type : Permanent contract
Position description :
HSE ✓ Ensures HSE policy fulfillment during his activities ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Is responsible to ensures compliance with HSE (occupational and process) Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance and responsible environment attitude ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity ✓ Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (if required); ✓ Performs the updating of technical documentation; ✓ Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions; ✓ Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause ✓ Failure Analyses, Process Incidents audits and other activities as required; ✓ Operates in conformity with mechanical codes, standards, regulations and industry best practices (ASME, API,ANSI, and ✓ OSHA); ✓ Checks and verifies that mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out; ✓ Participate to safety talk before and after intervention ✓ Participates to key procedure audits in proactive manner; ✓ Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations ✓ Organises on site the maintenance operations which are placed under his responsibility, ✓ Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of utilities and equipment placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out, at the CSR request, any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status.

Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 3 to 5 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent)
Location : GIRASSOL FPSO
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : B-Limited working proficiency
Language / Level :
Portuguese : B-Limited working proficiency

2026-41936 - CONTRACT SITE REPRESENTATIVE (CSR) H/F

Wed, 25 Feb 2026 23:18:54 Z

Contract type : Permanent contract
Position description :
PURPOSE Under the authority of Contract Manager/Deputy Contract Manager and the SAS Technical Manager, he organises and plans maintenance operations on site, whether these are carried out by his own teams or by subcontractors. He is the technical and HSE management representative of NorSpie on site. He is responsible for the on-site management of NorSpie’s maintenance teams (administrative, operational, coordination, professional). HSE: Ensures HSE policy fulfilment during his activities. Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. Ensures compliance with HSE (occupational and process) Legislation, Company Standards Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Ensure mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out (including the collective tool certification). Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety. Operational Safety and Plan Integrity. Contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions. Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause. OPERATIONS Working closely with TotalEnergies’ site maintenance superintendent, He: Advises TotalEnergies superintendent on 2 weeks, monthly and annual planning, - Distributes the daily activity to the supervisors as prepared by the planning team, - Coordinates the maintenance and inspections operations, - Accountable of the site contractual performances (including the KPI). Methods - Ensures the appropriateness of the operating and maintenance procedures and tools employed by his crews and, if necessary, suggests improvements to TotalEnergies’ maintenance superintendent, - Ensures co-ordination between maintenance operations and Preparation teams, - Keeps an up-to-date list of work that cannot be performed except during inspections of machines or shutdowns, - Suggests corrective measures to TotalEnergies if this backlog threatens to become unmanageable, Team Leading Responsible for his teams on site: - Ensures the correct behaviour of his teams in accordance with the general safety regulations of the subsidiary and, if need be, takes the necessary corrective measures, - With the assistance of NorSpie base support, he organises the rotation schedules of his teams (administrative and logistical requirements, crew changes, etc.) - Identifies the training needs of his teams and makes training requests as appropriate. - Manages the Nationalisation plan and proposes all necessary adjustments.

Experience in offshore activities. Proven ability to lead and motivate large multi-national dedicated team. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, show common sense, organization ability and responsibility. Rigorous and methodical in his approach to operation in particular handling operation Must be able to anticipate and analyze situation. Natural authority, founded on his abilities and on the trust, he has in his team. Play a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Location : esbjerg
Language / Level :
English : C-Professional working proficiency

2026-42238 - Construction I&E Representative * M/F

Wed, 25 Feb 2026 13:59:50 Z

Contract type : Permanent contract
Position description :
Roles & Responsibilities • Supervise the installation, testing, and pre-commissioning of I&E systems including switchgear, SCADA, ESD, and instrumented control systems • Ensure compliance with Chevron’s Electrical Safe Work Practices and critical work procedures • Participate in daily construction coordination meetings and interface with other discipline reps to align on SIMOPS and execution priorities • Conduct field inspections and verify that all I&E work meets Chevron specifications and industry standards • Be present during hazardous and heavy lifts involving I&E equipment, ensuring proper planning, qualified personnel, and safety documentation are in place • Mentor contractor teams on safe work practices and hazard identification • Collaborate with construction coordinators, commissioning teams, and operations to ensure seamless handover of I&E systems • Track and report progress, punch list resolution, and readiness for startup milestones • Maintain accurate records of I&E installation, testing, and turnover documentation • Provide daily and weekly updates to the Construction Services Manager and escalate issues as needed • Track and document daily time-on-tools using IOC tools (e.g. SASBU IODSC), and monitor installation durations versus estimates

Competency Expectations • Vast knowledge of I&E systems, installation standards, and testing protocols. • Ability to lead field execution teams and coordinate across disciplines and contractors. • Safety & Compliance: Strong commitment to Chevron’s OE expectations and regulatory standards • Clear communicator with stakeholders at all levels, including contractors and base business teams. • Proactive in identifying execution risks and proposing mitigation strategies
Location : CABINDA, MALONGO
Language / Level :
English : D-Full professional proficiency

2026-42196 - CAMPAIGN TEAM LEADER ** M/F

Mon, 23 Feb 2026 09:56:08 Z

Contract type : Permanent contract
Position description :
PURPOSE ✓ Have a good understanding of COMPANY HSE rules. ✓ Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), ✓ well as approved operating procedures and standard industry practice during preparation of maintenance ✓ Assists the GMC teams on field to spread the HSE policies and to put the rules in place. ✓ Ensures that the team working with him have well understood group policies and apply them ✓ Advices, while permit to work redaction, the specific trade measures to establish and ensures tools adequacy. ✓ Ensures operations are planned in accordance with rules. ✓ Take particular attention to the planning linked to the SCE equipment.

HSE ✓ Have a good understanding of COMPANY HSE rules. ✓ Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), ✓ well as approved operating procedures and standard industry practice during preparation of maintenance ✓ Assists the GMC teams on field to spread the HSE policies and to put the rules in place. ✓ Ensures that the team working with him have well understood group policies and apply them ✓ Advices, while permit to work redaction, the specific trade measures to establish and ensures tools adequacy. ✓ Ensures operations are planned in accordance with rules. ✓ Take particular attention to the planning linked to the SCE equipment. Operations ✓ Organizes on site the maintenance operations which are placed under his responsibility, ✓ Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of utilities and equipment placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status. ✓ Review on a daily basis with the Maintenance superintendent the needs. Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance program and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Suggests improvements and requests modifications.. Quality Assurance Suggests improvements and requests modifications
Location : DALIA FPSO
Language / Level :
English : C-Professional working proficiency
Language / Level :
Portuguese : C-Professional working proficiency
Language / Level :
French : A-Elementary proficiency

2026-41835 - SAS Manager H/F

Mon, 16 Feb 2026 09:04:24 Z

Contract type : Permanent contract
Position description :
- Management and co-ordination of all the onshore support including - Preparation - Planning & scheduling - Method - Spare part - Workshop - Support of offshore operations, - Directly liaise with contract manager and offshore management.

- The holder of this position must have the following qualifications: - Equivalent of DUT/BTS (French), B.Sc. Mechanical/Instrumentation/Electrical Engineering (2.1), - 10 years of general industrial maintenance, with 5 years assignment in the oil/gas industry, - Computer literacy is required - Ability to work in a multinational team. Ability to work in a service relationship. - Polyvalent and experienced in the following trades: mechanical/fitting, handling, tooling, electricity, instruments, - Experience in CMMS (SAP/R3) and Stock Tool systems (skilled user level), - He must have a proven sense of responsibility and authonomy - He must be rigorous and methodical in his approach to operations. - He must be able to anticipate and analyse. - He must have proven ability as a leader of dedicated teams. - Natural authority, founded on his abilities and on the trust he has in his teams, is essential
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency