RSS export of vacancies - Only featured vacancies : No / Contract type : Permanent contract

2026-44353 - INSTRUMENT & PLC SUPERVISOR M/F

Sat, 05 Sep 2026 22:16:37 Z

Contract type : Permanent contract
Position description :
SPIE Global Services Energy is currently looking for Instrument & PLC Supervisor to join its work force in Nigeria. Key Responsibility: Responsible for assuring from Validation by COMPANY ICSS Engineer the accurate control, authorization verification, integrity and follow-up of all software and hardware for use in the ICSS and systems at the Power Generation Plant Guarantees a good level of availability of the equipment on site Performs the diagnostics and trouble shooting in the ICSS and PLC, Follows-up the parameter values and alarms in the concerned systems, for condition monitoring purpose, Carries out, at the CSR request, any intervention within his field of competence. Organises on site, the maintenance operations which are placed under his responsibility, Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during preparation and performance of maintenance operations placed under his responsibility, Manages interventions using the CMIMS SAP R3, Enters intervention reports on CMIMS (including those concerning SMC) and writes the technical reports related to his field, Monitors the functioning of utilities and equipment placed under his responsibility, Takes part in daily, weekly and coordination meetings on site, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manages the team of technicians directly under his responsibility,

Technical Engineer / Higher National Diploma (HND) or equivalent in Mechanical / Electrical / Instrumentation Engineering with a minimum of 5 to 10 years’ experience in the operation and maintenance of Gas Turbines and auxiliaries in oil and gas production installations or power generation plant A thorough, demonstrated understanding of plant operations, strong understanding of Gas Turbine and axial compressor, DCS, ESD, F&G, Field Bus, Field instrumentations, PLC, Bentley Nevada and online condition monitoring system, Mechanics, Hydraulics, Electricity and Electronics. Understanding SAP/R3 PM modules as relate to Notification, work orders, PM’s, and spare parts inventories. Experience in Troubleshooting, Root Cause Analysis, Health Checks, monitoring, PM and Corrective Maintenance. Competent computer skills, especially Microsoft Office products; Excel, and Word. Solid knowledge of plant engineering and plant maintenance functions and how they relate to operations. Strong oral and written communication skills in English Language. Ability to comprehend and apply technical information, including mechanical and electrical drawings (such as blueprints, P&IDs, single-line diagrams and schematics) to problem-solving situations and trouble-shooting. Ability to communicate and coordinate work on technical subjects with others across job families and with outside vendors. Must have proven ability as a leader of small team. Perfectly competent and independent in his field, he must show common sense and organizational ability.
Location : Port Harcourt
Language / Level :
English : C-Professional working proficiency

2026-44581 - Heavy Duty Mechanic M/F

Thu, 03 Sep 2026 05:48:50 Z

Contract type : Permanent contract
Position description :
Duties and Responsibilities • Responsible for the garage mobile equipment/ static equipment PMs/ breakdowns implementations, inspections and quality tests in garage and at SITE locations. • Test mechanically various vehicles/ equipment after repairs or assembly or PMs Jobs to ensure proper performance and compliance with manufacturers' specifications. • Repair and replace damaged parts. • Carry out overhauling of Hydraulic systems such as different type of hydraulic pumps, control valves, relief valves, Hydraulic motors, Hydraulic cylinders, etc… • Operate and inspect machines or heavy equipment in order to identify defects. • Analyses faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices. • Clean, lubricate, and perform other routine maintenance works on vehicles/ equipment as per approved schedules and priorities. • Provide technical services reports for vehicles/ equipment, and keep equipment services records maintained and updated with full complete details and signatures. • Read and understand operating manuals, technical drawings as well as risks associated with the each task. • Performs regular maintenance checks on garage mobile equipment's and maintains a log of such inspections. Guides Mechanics/Helpers in performing the assigned tasks. • Undertakes the planned job of repair / maintenance as per Supervisors instructions, performs duties with good Garage working practices and techniques and in accordance with manufacturer’s recommendations, and adheres to COMPANY’s safety requirements. • Ensure a safe WORK environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task. • Involve and execute repairs and overhaul jobs of the various equipment including heavy lifting vehicles/ portable equipment, pumps, air compressor, transmissions, controls and accessories, etc. • Apply technical experience in the role of the field mechanic to make the repairs necessary in the field and perform preventive maintenance practices necessary to increase service life of the equipment. • Perform all other duties deemed necessary or assigned.

Experience, Knowledge and skills Relevant Work Experience: • Technical background, preferably in Mechanical Engineering & Automobile Engineering • Minimum of 6 Years’ experience in service/repair in hydraulics, pneumatics, petrol/ diesel engines, mounted on mobile cranes/Forklifts/Trucks deployed in Oil and Gas Industry. • Should have an extensive knowledge/ hand experience of hydraulic systems on mobile equipment's, Cranes, Forklifts, and Truck Mounted Cranes. • Must have experience in maintenance activities of Hydraulic pumps, Control valves, Pressure relief valves, PCVs, Hydraulic pilot systems, Hydraulic cylinders, Winch motors, etc.. • Must have experience in maintenance activities of hydraulic hoses. • Familiar with maintenance and operation of firefighting Equipment/Vehicle. • Have a very good experience in heavy equipment workshop activities. • Must have knowledge of Oil & Gas plant working environment. • Should have driving license such as light duty vehicles, Heavy vehicles, Crane, forklift etc… • Must carry Industrial training institute certificate in the field of mechanical/ Automobile
Location : RASLAFFAN
Language / Level :
English : B-Limited working proficiency

2026-44580 - Overhead Crane Technician (Field Maintenance) M/F

Thu, 03 Sep 2026 05:47:46 Z

Contract type : Permanent contract
Position description :
Duties and Responsibilities • Familiarity with Overhead crane Operation and Maintenance • Good understanding of crane operations including a very broad category relating to safe crane operation. • Has general knowledge such as ( but not limited to ) inspection, wire rope, rigging accessories, rigging appliances, has understand ASME 30.5 ( wire rope and criteria). • Understanding and the components of load chart and range diagram and set up of equipment properly. • Well-versed with all the troubleshooting and maintenance techniques such as hoisting Motor / brake, Hoisting limit switch adjustment, Rope drum / guide / clamps / anchorage maintenance, Rope sheaves, Overhead trolley, couplings, Crane block, Hook, Hoist, etc. • Understand and performs Pre-check inspection, Safe working practices and inspection checklist. • Provide feedback about the effectiveness of the implemented corrective and preventive measures • The prompt reporting of deficiencies in risk control measures, including those arising from changes in working conditions, staffing levels and change in equipment condition. • Support Company EHS and Quality policies and programs and implement all OH&S procedures and practices. • Good interpersonal skills and ability to work as a member of a team. • Understanding and avoiding site hazards • Reports all Near Misses, Incidents and Accidents during operation

Experience, Knowledge and skills Educational Qualifications: Minimum Higher Secondary School Education Relevant Work Experience: A minimum of 5 years work experience. A minimum of 3 years at Oil & Gas or LNG Plant or Petrochemical plant environment English Language Skills: Good written and oral communication skills in English. Trade Certificate / Specialized Trainings: Hold a valid certificate of competence, issued by an recognized body. Job Specific Requirements: • Must have extensive experience operating overhead crane and practical knowledge and more importantly, familiarity with equipment for about three years depending on model and year of manufacturer. • Identifying parts and functionality required for a particular lifting. • Determine the defective parts by proper inspection as per ASME 30.5. • Able to read and fully understand the details or reference of an overhead crane manual book. • International / standard lifting signal knowledge. • Has practical knowledge of maintenance and minor trouble shooting of different types of OHC equipment. • Understands lifting hazards identification.
Location : RASLAFFAN
Language / Level :
English : B-Limited working proficiency

2026-44561 - Tax & Legal Coordinator M/F

Wed, 02 Sep 2026 22:15:59 Z

Contract type : Permanent contract
Position description :
SPIE Global Services Energy is Looking for Tax & Legal Coordinator to join its workforce in Nigeria. Key Responsibilities: Preparation, filing, payments follow-up of all taxes due; VAT, WHT, ITF, NSITF, PAYE (local & expats), CIT, Pensions and other statutory responsibilities. Making sure that company is compliant with all Tax & Legal requirements Managing tax audits Liaising with various authorities Postings, reviewing and matching of accounts in the ERP Liaising with company’s external solicitors on legal matters; Insurances Management In charge of relationship with Company Secretary Support in any other topic regarding Tax & Legal matters.

The incumbent will coordinate all legal and tax-related matters of the company. The role ensures compliance with local regulations, group policies, and best practices, while proactively identifying legal and tax risks and supporting business operations.
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency

2026-44569 - Juriste Senior Droit des Affaires Internationales & Compliance M/F

Wed, 02 Sep 2026 14:04:06 Z

Contract type : Permanent contract
Position description :
La finalité du poste est d’assurer la protection juridique de SPIE Global Services Energy lors de toutes les négociations de contrats que toutes nos filiales peuvent signer. Être un conseil, un expert au service des équipes opérationnelles et fonctionnelles pour définir ensemble la stratégie juridique pour préserver les intérêts de SPIE Global Services Energy. Accompagner les équipes dans le cadre de l’analyse, la négociation, l’exécution et la clôture des contrats en proposant des solutions pragmatiques et efficaces et ce, en garantissant le respect de nos procédures et des contextes réglementaires et législatifs applicables, en France et à l’international. Sur la partie compliance, être le relai en local auprès des équipes du déploiement du programme Compliance et spécifiquement, de lutte contre la corruption dans tous ses aspects. - Revoir, rédiger, qualifier une grande variété de contrats (MOU, accords de confidentialité, contrats de partenariats, contrats de services, contrats d'opération maintenance, projets clé en main) et participer à leurs négociations ; - Participer au suivi de l’exécution de certains contrats notamment via certains actes de contract management ; - Revoir et négocier les garanties maison-mère ; - Préparer la documentation juridique de réponses à des appels d’offres ; - Participer au processus de revue des risques en identifiant les risques juridiques et légaux et contractuels et fournir un support afin d’éviter ou de limiter ces risques, proposer des solutions innovantes aptes à réduire les risques ; - Apporter expertise et conseil en droit des affaires, tant en France qu’à l’international, aux clients internes basés en France et dans toutes nos filiales internationales ; - Proposer aux clients internes des schémas correspondant à leurs besoins ; - Suivre les contentieux et précontentieux nationaux/internationaux avec les avocats externes ; - Participer à la mise à jour et l’élaboration de modèles de clauses ou de contrats ; - Préparer des modules de formation interne sur des points de droits des affaires ; - Suivre les évolutions législatives et réglementaires applicables aux opérations ; Se faire le relai en local de la mise en œuvre de la gouvernance d’entreprise, des règles du code de conduite et de toutes les procédures éthiques applicables (rappel des règles, formation..).

Pack Office (Excel et PowerPoint avancé). De formation juridique supérieure (Bac +5) en Droit des Affaires. 7 ans et + d’expérience en entreprise ou en cabinet d’avocats. Le CRFPA est un plus. Des connaissances en Compliance sont un plus. Appétences pour le LegalOps est un plus. Anglais courant. L’espagnol est un plus. Faire comprendre un sujet complexe aux équipes en proposant des solutions concrètes. Être à l’écoute des besoins des équipes pour y répondre efficacement. Capacité à embarquer une équipe dans un projet donné. Capacité à endosser une mission transverse. Prise de recul/de hauteur sur les problématiques rencontrées. Force de proposition et innovation sur les réflexes juridiques à adopter. Sens du service. Pragmatisme, Esprit de synthèse avec maturité. Faire preuve de pédagogie. Proximité, être opérationnel, capacité à se plonger dans les détails de la réalité de chaque filiale. Adaptabilité. Curieux(se). Esprit d’équipe. Aisance rédactionnelle et orale.
Location : 10 Avenue de l'Entreprise, 95800 Cergy, France
Language / Level :
French : D-Full professional proficiency
Language / Level :
English : D-Full professional proficiency

2026-44568 - Juriste Droit des Affaires Internationales & Compliance M/F

Wed, 02 Sep 2026 13:09:58 Z

Contract type : Permanent contract
Position description :
La finalité du poste est d’assurer la protection juridique de SPIE Global Services Energy lors de toutes les négociations de contrats que toutes nos filiales peuvent signer. Être un conseil, un expert au service des équipes opérationnelles et fonctionnelles pour définir ensemble la stratégie juridique en préservant les intérêts de SPIE Global Services Energy. Accompagner les équipes dans le cadre de l’analyse, la négociation, l’exécution et la clôture des contrats en proposant des solutions pragmatiques et efficaces et ce, en garantissant le respect de nos procédures et des contextes réglementaires et législatifs applicables, en France et à l’international. Sur la partie compliance, être le relai en local auprès des équipes du déploiement du programme Compliance et spécifiquement, de lutte contre la corruption dans tous ses aspects. - Revoir, rédiger, qualifier une grande variété de contrats (MOU, accords de confidentialité, contrats de partenariats, contrats de services, contrats d'opération maintenance, projets clé en main) et participer à leurs négociations ; - Participer au suivi de l’exécution de certains contrats notamment via certains actes de contract management ; - Revoir et négocier les garanties maison-mère ; - Préparer la documentation juridique de réponses à des appels d’offres ; - Participer au processus de revue des risques en identifiant les risques juridiques et légaux et contractuels et fournir un support afin d’éviter ou de limiter ces risques, proposer des solutions innovantes aptes à réduire les risques ; - Apporter expertise et conseil en droit des affaires, tant en France qu’à l’international, aux clients internes basés en France et dans toutes nos filiales internationales ; - Proposer aux clients internes des schémas correspondant à leurs besoins ; - Suivre les contentieux et précontentieux internationaux et nationaux et Gérer les avocats externes ; - Participer à la mise à jour et l’élaboration de modèles de clauses ou de contrats ; - Préparer des modules de formation interne sur des points de droits des affaires ; - Suivre les évolutions législatives et réglementaires applicables à ces opérations ; Se faire le relai en local de la mise en œuvre de la gouvernance d’entreprise, des règles du code de conduite et de toutes les procédures éthiques applicables (rappel des règles, formation..).

Pack Office (Excel et PowerPoint avancé). De formation juridique supérieure (Bac +5) en Droit des Affaires. Au moins 5/7 ans d’expérience en entreprise ou en cabinet d’avocats. Le CRFPA est un plus. Une appétence pour le LegalOps est un plus. Anglais courant. L’espagnol est un plus. Faire comprendre un sujet complexe aux équipes en proposant des solutions concrètes. Être à l’écoute des besoins des équipes pour y répondre au mieux. Sens du service, Pragmatisme, Esprit de synthèse, Faire preuve de pédagogie, Proximité, être opérationnel, capacité à se plonger dans les détails de la réalité de chaque filiale, Adaptabilité, Curieux(se), Aisance rédactionnelle et orale.
Location : 10 Avenue de l'Entreprise, 95800 Cergy, France
Language / Level :
French : D-Full professional proficiency
Language / Level :
English : D-Full professional proficiency

2026-44441 - Tender & Sales Manager M/F

Thu, 20 Aug 2026 02:42:48 Z

Contract type : Permanent contract
Position description :
· Managing tender process · Review and ensure administration and technical documents can be aligned and meet tender requirements · Coordinate with related departments to ensure complete submission · Update any changes in tender regulation · Promote SPIE in potential market · Develop networking with potential clients and explore potential opportunities · Do market analysis (including changes in regulation), customer and competitor intelligence · Define and develop business strategy for SPIE's business positioning · Maintain sales volume in the pipeline for business sustainability

-Barchelors Degree -Minimum 10 years of relevant experience in tendering, quantity surveying, contracts, or commercial management. -Strong experience in costing, contractor procurement, and contract review. -Good knowledge of oil & gas industry, claims, payment terms, liquidated damages, extensions of time, and commercial risk. -Proficient in Microsoft Excel and tender or quantity take-off software. -Strong negotiation, analytical, communication, and leadership skills. -Able to manage multiple tenders and work under tight submission deadlines
Location : Plaza Semanggi, Jl. Jendral Sudirman Kav - 50 No.Lt. Gf, RT.1/RW.4, Karet Semanggi, Kecamatan Setiabudi, Kota Jakarta Selatan, Daerah Khusus Ibukota Jakarta 12930, Indonesia
Language / Level :
English : E-Native or bilingual proficiency

2026-44087 - Responsable Qualité Assurance / Qualité Contrôle H/F

Fri, 14 Aug 2026 22:12:29 Z

Contract type : Permanent contract
Position description :
1-Gestion du système de management Qualité (Procédures, manuels, RDD, audits.) 2- Animation et organisation de l'équipe Qualité 3- Participation au traitement des évènements indésirables de le cadre de la conformité qualité 4- Coordination de la mise en place et du suivi des actions correctives et préventives identifiées suite aux Non-conformités /Observations/ anomalies/ piste d'améliorations venant des différentes sources de remontée. 5- Réalisation des analyses des risques qualité 6- Participation aux réponses des appels d'offre sur le volet qualité de service 7- Réalisation des réunion, sensibilisations qualité nécessaire 8- Gestion des licences et des certifications qualité 9- Suivi des formations et habilitations en lien avec les disciplines qualité

Les normes ISO 9001/ API Q1/ 5CT/ 7-1/ VAM PROCESS/NOV PROCESS Exigences des organismes de licences Anglais professionnel une expérience significative dans des fonctions QHSE Capacité à analyser un accident par la méthode de l'arbre de causes/QQOQC et autres Réaliser des analyses de risques Analyser une Non-conformité Réaliser des audits qualité Former sur la gestion qualité des process Exemplaire, Rigoureux, Transversalité, Organisé, Communicateur, Persuasif, Bon relationnel, Force de proposition, Engagé
Location : Port-Gentil
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : D-Full professional proficiency

2026-44364 - Responsable Comptable Statutaire France H/F

Mon, 10 Aug 2026 14:25:19 Z

Contract type : Permanent contract
Position description :
Le responsable comptabilité garantit la fiabilité des informations comptables des entités françaises du sous-Groupe SPIE GSE et veille à ce que les données comptables et les normes soient correctement appliquées et que les délais soient respectés. Il/elle s'assure que le bilan et le compte de résultat sont sincères et exacts. Il/elle fait le lien entre la structure et les intervenants financiers (banques, expert-comptable, commissaire aux comptes, administrations fiscales et sociales, etc.). · Veiller au respect des règles QHSE et des procédures. · Superviser l'équipe comptable. · Analyser le bilan et le compte de résultat pour préparer les clôtures mensuelles, trimestrielles et annuelles. · Identifier les erreurs comptables et mettre en œuvre les actions correctives. · Préparer les déclarations fiscales (TVA, liasses fiscales, impôts) et répondre aux demandes des autorités fiscales. · Appliquer et faire respecter les règles et procédures comptables, les délais légaux et la traçabilité documentaire. · Garantir le respect des règles d'éthique propres à la fonction. · Garantir la fiabilité des comptes · Mettre en place et améliorer les procédures comptables · Produire les reportings à destination du sous-Groupe · Accompagner les évolutions des systèmes d'information comptables · Former et développer les compétences de l'équipe

- Niveau d'étude : Bac+2 à Bac+5 - Management d'équipe - Esprit comptable et analytique - Rigueur et méthode - Discrétion et confidentialité - Excellente maîtrise de la comptabilité générale et auxiliaire - Maîtrise des normes comptables applicables (PCG France) - Élaboration des états financiers (bilan, compte de résultat, annexes) - Fiscalité des entreprises (TVA, IS, CET…) - Déclarations fiscales et sociales - Connaissance de la consolidation (appréciée) - Connaissance ERP Comptable IFS (apprécié) - Anglais professionnel (apprécié)
Location : 10 Avenue de l'Entreprise, 95800 Cergy, France
Language / Level :
French : E-Native or bilingual proficiency

2026-43063 - Chef de Chantier Turbines

Wed, 22 Jul 2026 22:09:17 Z

Contract type : Permanent contract
Position description :
MISSIONS: Réaliser, organiser et suivre les chantiers de machines tournantes, turbines ou auxiliaires dans le respect en termes de coût, qualité, délai. Il supervise une équipe de chef d'équipe et/ou de monteur mécanicien. Prendre en charge le matériel o Réaliser/s’assurer/valider l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées o Identifier/s’assurer/valider les pièces et les sous-ensembles et de leur stockage approprié o S'assurer/valider que l'ensemble des pièces et sous-ensembles sont disponibles Démonter et expertiser o Réaliser/s’assurer/valider le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles o Réaliser/s’assurer/valider le nettoyage approprié des pièces et des sous-ensembles o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique / des jeux fonctionnels o Identifier/s’assurer/valider les pièces à réparer ou à remplacer o Renseigner le compte rendu d’évaluation et proposer au pilote de l’affaire réparations à effectuer. Remettre en état et remonter le matériel o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique des pièces neuves ou réparées o Réaliser/s’assurer/valider le contrôle des jeux fonctionnels en cours de remontage o Réaliser/s’assurer/valider les opérations d’ajustage / montage / les opérations simples de tuyauterie et chaudronnerie / les travaux par point chaud (soudure, montage par dilatation thermique…) Opérations de réglage (sur chantier) o Réaliser/s’assurer/valider les opérations de réglage (lignage des internes d’une turbine, alignement machines, pesage de corps,…) Traçabilité des opérations o Remplir/s’assurer/valider les feuilles de contrôle associés aux opérations de maintenance effectuées o Participer/rédiger/valider les divers rapports et procès-verbaux (partie constat au minimum) et le faire signer au client o Proposer des solutions au pilote d’affaire o Renseigner et valider le Plan Qualité Affaire et/ou gamme Piloter l’activité o Valider et signer le PDP o Signer le PV d'ouverture de chantier et envoyer au pilote* d'affaire o Veiller à l'exécution des travaux attribués par pilote* d’affaire conformément au planning o Informer quotidiennement le pilote* d’affaire de l'avancement du chantier et émettre des rapports journaliers.... Assister lors de la mise en service (sur chantier) Assurer la gestion et l’animation des ressources (moyens humains, matériel et technique)

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative Savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : D-Full professional proficiency

2025-39134 - Project Engineer M/F

Fri, 05 Jun 2026 09:08:26 Z

Contract type : Permanent contract
Position description :
· Understanding specialist legislation (standards and regulations) in the Electrical Engineering & Fibre Optic field and develop plans & procedures to achieve and maintain full compliance for the SPIE Wind Connect group. · To ensure adherence to the necessary electrical / fibre optic safety and technical standards for the SPIE Wind Connect Group. · Implement the required engineering standards and best practice techniques for electrical / fibre optic works, taking responsibility for meeting industry recognised standards and client requirements. · Contribute towards improving technical and operational procedures used within the group. · To provide electrical / fibre optic technical support and guidance for the SPIE Wind Connect group functions ensuring compliance throughout the business. · Operational understanding of all specialist electrical / fibre optic test equipment used within the SPIE Wind Connect Group. · Monitor, review, and critique all test equipment used in SPIE Wind Connect Group operational activities. Analyse for suitability, performance and reliability of different manufacturers models. Support the SPIE Wind Connect equipment hire department, with recommendations for selection of equipment in terms of excellence, reliability and maintenance. · Ensure electrical/ fibre optic test equipment is in good working order. · Provide specialist functional electrical / fibre optic training to the operational personnel. · Assist in the development of training courses and testing regimes. Support the SPIE Wind Connect Group in providing technical expertise for client technical clarifications during tender, project life cycle and business development opportunities.

Project engineer reporting directly to the Head of Projects / Lead Project Engineer. Providing engineering & technical support for all operational aspects engineering works performed in business execution. Working within the engineering support team; providing technical solutions & procedures for all HV & fibre optic operations within the SPIE Wind Connect Group.
Location : Skelton, TS12 2LQ
Language / Level :
English : C-Professional working proficiency

2026-43605 - INSTRUMENT SENIOR TECHNICIAN M/F

Fri, 05 Jun 2026 05:44:09 Z

Contract type : Permanent contract
Position description :
HSE: · Ensures that COMPANY’s HSE rules and regulations are strictly observed, (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during the performance of maintenance operations placed under his/her responsibility. · Establishes and maintains a strong safety culture in line with TotalEnergies’ HSE requirements and rules. · Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (If required) · Update his technical documentation. · Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about any HSE issues and proposing corrective solutions. · Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause Failure Analyses, Process Incidents audits and other activities as required; Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) · Ensure validity of work permit relevant to the work scope before handling a task. · Checks and verifies that mandatory aspects (including those concerning local law scenarios) are properly implemented for all activities conducted, METHODS · Contribute to relevant kick of meeting related to maintenance operation. · Keeps a critical eye on current preventive maintenance programs and, suggests improvements if required, · Identifies recurrent corrective maintenance interventions, analyses them, and suggests improvements, OPERATION · Organises and performs on site the maintenance operations which are placed under his/her responsibility, · With his/her teams, assists specialists working under Specific Maintenance Contracts (SMC), · Monitors the functioning of systems placed under his/her responsibility, · Ensures that the transfer of knowledge by mentoring occurs properly within his/her teams, and actively · Manages the team of technicians directly under his/her responsibility, · Performs any intervention within his/her field of competence at the request of the CSR. · Takes in charge the systems under his/her responsibility in case of breakdown, until correct operation status resumes. INSTRUMENT SENIOR TECHNICIAN SPECIFIC · Must have advanced technical knowledge of all types of Instrumentation, Process Control, Fiscal Oil & Gas Metering, Fire & Gas and ESD safety systems. · In addition to the duties of an Instrument technician, is also responsible for Level 1,2,3 servicing, maintenance and testing of the above equipment as per the CMIMS – UNSIOL system. · DUCSAT offshore operations are normally 24hr. Day shift 12 hours / Nightshift 12 hours to maximise ‘tool time’.

A basic knowledge of the process of oil and gas operations & installations and a thorough knowledge of the equipment used in oil and gas operations & installations. The Ability to lead and motivate multi-national teams. Pride in his/her work, ability to maintain good relations with colleagues and others. Physically ability to work on offshore installations in the climatic conditions of the site. He/she must have proven ability as a leader of small teams. Perfectly competent and independent in his/her field, he/she must show common sense and organisational ability. Natural authority, founded on his/her abilities and on the trust he/she has in his/her teams, is essential
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43599 - ELECTRICAL TECHNICIAN M/F

Thu, 04 Jun 2026 14:30:27 Z

Contract type : Permanent contract
Position description :
HSE: Ensure HSE policy fulfillment during his activities. Establishes and maintain a strong safety culture in line with TotalEnergies’ HSE requirements and rules. Complies with HSE Legislation (Occupational and process), TotalEnergies’ standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Complies with Operating Procedures and Guidelines with the asset to ensure process safety, operational safety, and plan integrity. Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specifics ones (If required) Report anomalies, accidents, near misses Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) Check validity of work permit relevant to work scope before handling a task. Checks and verifies that mandatory aspects (including those concerning local law scenario) Participate to safety talk before and after intervention. Participate to key procedure audits And for Electricity in particular: Knowledge of electrical Certification requirements and be certified as required. Be aware of permit to work and electrical isolations requirements. Be aware of gas test requirement. Understand hazards associated to leak tests and hydrotests. THEORICAL KNOWLEDGE Have a basic understanding of facilities/process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…). Understanding and use of basic laws and units of physic (resistance, inductance, DC & AC current and voltage, frequency, active and reactive power…). Be able to differentiate low and high voltages. Possess notions on cable sizing and voltage dropping. Be able familiar with a general facilities electrical network philosophy Have a basic understanding of inter-tripping and interlocking action, load shedding and load sharing modes. For electrician technicians only, have a basic understating of cathodic protection system. Understand working principle of main electrical equipment For those, be aware of their preventive maintenance requirements. Be aware of CBM (thermography) requirement and purpose. Understand principles and know the different systems of earthing Understand preventive, corrective maintenance and maintenance plan concepts. OPERATION Be able to maintain and troubleshoot small electrical installation like lighting and heat tracing circuit. Be able to identify the different types of cables (including ground ones) connect those properly (using lugs) and perform their proper laying Be able to do preventive maintenance on non-critical equipment LV Electrical equipment: - Be able to dismantle, replace defective parts, reassemble, reconnect, and check the system. - Identify all accessories - Identify correctly for other people risks generated by his activity.

Perfectly competent and independent in his field specially: Must show common sense, organization ability and responsibility. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Rigorous and methodical in his approach to operation and able to anticipate and analyze situation. Able to complete mechanical preventive and corrective maintenance according to planning and instructions.
Location : OFFSHORE
Language / Level :
English : C-Professional working proficiency

2026-43593 - CRANE PREPARATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:35:36 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Gives his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs’, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Technical Preparation and Site Support
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43592 - INSTRUMENTATION PREPARATOR (Onshore) M/F

Thu, 04 Jun 2026 12:33:30 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Technical Preparations and Site Support
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43591 - INSTRUMENTATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:31:54 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required

Experience in INSTRUMENT/TELECOMMS Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43590 - ELECTRICAL/HVAC TECHNICIAN (onshore) M/F

Thu, 04 Jun 2026 12:30:14 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all ELECTRICAL & HVAC preparation subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability. Take charge of Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparation standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Experience in ELECTRICAL Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), E-vision permit Systems and other Preparations, Tools/Resources.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43452 - ELECTRICAL REFERENT M/F

Thu, 28 May 2026 13:32:11 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION: • The Electrical Referent is the technical and compliance authority for all electrical activities within the scope of the contract. • He/she is responsible for ensuring that all electrical works are executed in full compliance with: • Client electrical procedures and requirements • NorSPIE electrical safety rules and standards • Applicable contractual, regulatory, and statutory obligations • The Electrical Referent shall ensure that electrical safety, control of work, and isolation rules are applied rigorously and without deviation. HSEQ: • Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. • Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. • Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity. • The Electrical Referent is responsible for ensuring that electrical training and authorization systems are: • Audit-ready at all times • Compliant with client and company requirements • Robust enough to withstand regulatory inspections and incident investigations • He/she shall actively prevent any non-compliant practice that could expose NorSPIE to: • Legal liability • Contractual penalties • Electrical safety incidents Participates in the continuous improvement of NorSPIE Integrated Management System: • Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non-conformities and ensures effective implementation and follow-up of all corrective and preventive actions. • Maintains and updates all documents within his/her area of responsibility. MAIN FUNCTIONS: • The Electrical Referent shall ensure that electrical competence is: • Verified prior to authorization. • Maintained throughout the assignment. • Fully documented and traceable. • Where personnel are authorized with restricted electrical scopes (e.g. isolation only, no electrical work), such limitations shall be: • Explicitly defined • Formally recorded • Clearly communicated • The Electrical Referent shall ensure alignment between: • Contractual Training matrix • Authorization systems • Actual tasks performed in the field

Strong understanding of electrical safety principles. Proven ability to operate within regulated and safety-critical environments. Demonstrated rigor, methodical approach, and sense of responsibility when managing electrical activities. Natural authority based on technical competence and trust Ability to anticipate, analyze, and manage technical risks Ability to work efficiently in a multinational and service-oriented environment Autonomous, rigorous, and reliable
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43451 - ASSET TECHNICAL LEAD (Onshore) M/F

Thu, 28 May 2026 13:27:51 Z

Contract type : Permanent contract
Position description :
GENERAL DESCRIPTION: The Asset Technical Lead is responsible for the management and co-ordination of onshore preparation for his/her asset: • Short and medium-term improvement methods. • Planning and scheduling of his/her asset. • Support of offshore operations. • Participate to the definition of long-term maintenance planning (it includes time schedule and resources definition) of his/her asset. • Management and co-ordination with the support of the SAS Manager: o Cranes and safety equipment preparation team. o CBM team. o PSV Workshop. • Directly liaise with SAS manager and offshore management. • Directly liaise with TEPDK method department. HSEQ: • Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. • Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. • Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: • Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non-conformities and ensures effective implementation and follow-up of all corrective and preventive actions. • Maintains and updates all documents within his/her area of responsibility. MAIN FUNCTIONS: • Coordinate all the activities related to offshore assistance of his asset. • Responsible of the Short-term planning of his asset. • Ensure the preparation is done in due time, in line with priority and site requirement. • Ensure all the means are available to guarantee offshore maintenance operations (Logistic, material, human) of his asset. • Ensure daily and weekly meetings with respective teams. • Ensure that GMC backlog of his/her asset is under control and well managed. • Coordinate with other operating entities (TEPDK / FMC / Vendors)

Polyvalent and experienced in maintenance activities, logistics, mechanics, electricity, instrumentation, in the oil and gas industry. Must show common sense, organization ability, responsibility, and autonomy. Pride in his/her work, ability to maintain good relations with colleagues and others. Ability to work in a multinational team. Ability to work in a service relationship. Proven sense of responsibility and autonomy Rigorous and methodical in his/her approach to operations. Able to anticipate and analyze. Proven ability as a leader of dedicated teams. Natural authority, founded on his/her abilities and on the trust he/she has in his/her teams, is essential.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43449 - PLANNER (Onshore) M/F

Thu, 28 May 2026 13:24:38 Z

Contract type : Permanent contract
Position description :
HSE Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Contributes to ensuring that TEPDK and NorSPIE’s QHSE regulations are considered during planning as well as approved operating procedures and standard industry practices. Gives his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. Take particular attention to the planning linked to the SECE equipment. GENERAL DESCRIPTION: • Responsible to plan and schedule (2 weeks, 5 weeks and 4 months look ahead) all activities under GMC activities in SAP tacking into account readiness (material, resources, support required from other stakeholders) • Ensure conformance to Client’s Company rules, best standards, and general legislations. MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs’, Preparations, Backlog Control Planning and Equipment availability/reliability. • Respect all processes and procedure (GMC and TEPDK) in place. • Ensuring planned jobs are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS/SAP for execution at site and work location. • Ensuring allocation of resources for the execution of planned jobs • Coordinate meetings with offshore stakeholders for review of draft plan, follow up on site feedbacks and make necessary adjustment before plan is frozen for offshore execution. • Follow up with offshore to ensure clean-up on SAP, of all planned and completed jobs. • Ensure 2 weeks is following the principal schedule, taking into account Vital equipment list, Smart Room request, Team Lead and offshore request. Scheduling principles (Campaign and SD’s excluded) • Interacts with other functional planners (maintenance, FMC, Well Services, Projects, etc.) and IOP planner to optimize interrelated activities. • Executes regular reviews of backlog of planned work to reduce as much as possible (especially the SECE). • Facilitate follow-up of non-executed jobs to ensure additional preparation of the WOs is done. • Coordinate shutdown and campaign: creation and follow-up of readiness tracker (list of WOs, opportunities jobs, materials follow-up, and reporting), ensure to give status during regular meeting with all different stakeholders. Creation of the execution plan (MS Project) and create progress report. • Communication with onshore material coordinators (GMC & TEPDK) regarding shipping of materials and create break-ins as required.

Maintenance Planner (Short and Medium Term)
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency